How to Apply Pour On
Applying StoneSet PourOn Gravel Binder is quick and straightforward. Using the PourOn Flow Bar, the binder is evenly distributed across the gravel surface where it penetrates the stones and forms a flexible bond as it cures.
Follow these simple steps to stabilise your gravel and transform loose stone into a clean, low-maintenance surface.
Clean
Prepare the surface
Ensure the gravel surface is clean, dry and free from debris. Remove leaves, dirt and loose contamination.
If the surface has been washed, allow 2–3 dry days before applying the binder.
Rake your gravel to correct depth:
6mm stone at 25mm deep
10mm stone at 30mm deep
20mm stone at 50mm deep
Mask and protect all surrounding areas with plastic and tape. Mark out your pour area for even coverage.
Pour
Prepare the resin
The binder is ready to use straight from the container, so no mixing is required.
Pour the PourOn Gravel Binder directly into a standard watering can. Attach the Pour On Flow Bar to the watering can
Bind
Pour the resin
Walk slowly across the area while pouring the binder evenly over the gravel.
The Flow Bar helps control the flow rate and coverage, preventing over-application.
Pour resin in 1-2 light coats for best results.
Smooth with a trowel.
Application rates:
Decorative: 1.5kg/ m²
Footpath: 2.0kg/ m²
Heavy Use: 3.0kg/ m²
Cure
Allow to cure.
Allow the binder to soak through the stones and cure naturally.
As it cures, it forms a flexible matrix between the stones, stabilising the gravel while maintaining its natural appearance.
Most surfaces will be stable within 24 hours, depending on weather conditions.
Clean tools with white spirit.
Protect the area for 24 hours while curing.
